10 best 3d printer extruders-

8766 Reviews Scanned And Analyzed

Top Customer Reviews: Micro Swiss MK10 ...

Rating: 5 out of 5 with 2 ratings
5 / 5
This all the metal hotend of MicroSwiss entirely solves a question that a PTFE the tubes have with the filament that melts inside him. Before I upgraded all 5 of the mine Flashforge Creator Pro printers with these, has used partorisca have to that rasgar down some extruders almost weekly to substitute clogged PTFE tubes. Now, I have been when being announces 2 years and no the clog only.

If the people are having questions with them, are likely that I am simply a lot that follows some instructions of installation. It is A lot Of ENTITY that a nozzle be backed was 1/4 turn to create the empty small for a steel/of aluminium feeds tube. If no, then some scrollings to heat directly until one feeds the tube and they no . It follows some excellent instructions in a MicroSwiss put web a lot closely to install these properly and can guarantee to have never the question again with clogged alimentary tubes.
5 / 5
Has tried all-the hot final metal of four different manufactures and this Micro the Swiss units are, for far, one has used more for my FlashForge Creator Pro. The box comprises all required for an installation. Well value of the extras few dollars.

Thank you Micros Swiss for your commitment the Exc and upper machining skills.

Top Customer Reviews: Mech Solutions Ltd ...

Rating: 4 out of 5 with 29 ratings
4 / 5 Edda
It has given on on cleaning nozzles and so only substitute them, which is scarce, but so better partorisca me.

BECAUSE THESE: I have bought the Creality CR-20 of Mech the solutions done some time, and has ordered also filament of them like this comfortable senses with these, more seat a prize is so only.

LIKES LAW: So only like an original nozzle that is coming with my printer. I have isolated all of the mine clogged the nozzles to the character reel of filament the fact for the moment. Has does not have to that nozzles of transmission partorisca the clog of then, but these take me out of the join the little time when some clogs have spent.

Has ARRIVED: In the cushioned envelope, so only the small plastic stock exchange with some nozzles. Simple packaging and any one squander.

CONCLUSION: there it has any a lot of to say. This work adds, value of the money and happy purchased him. It have been cleaning nozzles with the gun of hot and accupuncture needle and while work, has been time eating. Ossia So only easier. Better in mine sanity also!
5 / 5 Aurelia
Be conscious this does not return a E3D hotend. A threaded period is too superficial to do contact with a pause of heat.
Does not be missing a product partorisca this subject, assumed it so only do. It sees picture partorisca difference, E3D in right side.
An arrival and quality of the build of this product is well.
4 / 5 Ben
An inferior line are goes partorisca purchase again partorisca 2 reasons. I have had some subjects with Luxnwatts separates as it has not been one the fault of the traders but he have corrected a question quickly and my satisfaction. Secondly, Ossia the compraventa big and some works of product correctly out of a box as for some instructions of installation.

Has used trader like this Canadian because it has them think that augmented my transmissions partorisca take any one questions have solved if any one expect, sadly the pair , a way my questions have been solved to give me quite a lot of confidence in a business owner that can order with confidence again knowing the'll be cured of him owes an unexpected arrives.

If you are the newbie like this are, hot a bed in the first place and spray a same discharge of the free scent súper control hairspray in a bed and an impression sticks to a bed of printer so only well and impress them adds. I clean on adding afterwards with more cleaned of window and paper towel.

Be conscious of some properties of some material (filament) is printing with, takes the moment for a bed to heat up but a box of calm control leave to override a G-Code (learns in Cures) and pre-heat a bed before moulds.

Also, for incumplimiento in Curing the start of this printer on G-the code issues the mandate to fall a Z Orients down before printing15mm which will not print and also grind on yours . Hope This helps any one.

So much, Preferences, Configures Cure, Printers, Settings of Car, G to start with Code:
Changes this line: G1 Z15.0 F6000 ; I Move a program down 15mm
To this Line: G1 Z0.0 F6000 ; I Move a program down 0mm

that Uses a box of control, house, level of car on all 4 corners of a bed of printer, house again, pre-hot, hairspray, is ready for mecer.

Spent in Canada or included EUA, this trader is in bet sure .
4 / 5 Tashina
After installing and that careers some impressions there is remarked was down extruding like this after the week to try to imagine has gone by that he all is touched to lose to a tip a hole is not .04 it Likes Him To him one adds says is more likes .035 .03 But anyways chair some needs of control of the quality to be better,
5 / 5 Kate
A description is misleading. It says 10pcs . As have think that that it take 10x 0.4 nozzles. But lame 1x0.4, 2x0.2, 2x0.3, 2x0.5, 2x0.6 And 1x0.8.
Does not use any of some other measures so that it is reason has ordered 10 x 0.4.
Will change mine 2 star as like a shipper manages this.
4 / 5 Faviola
Some nozzles are probably A-1.
Will not know never reason bought him for mine FlashForge Finder (FlashForge is listed in a description of compatible products).
Resulted, is too small.
The vendor would owe that specify that give form, no those mark, but caveat emptor; buyer beware.
Checks A specs in your first PRINTER to purchase parts of substitution with widths (read 'imprecise') rows of printers.
4 / 5 Charlie
Has achieved was has seen email for help and has been said to be level of bed . With which a lot of test, before and after being said this, fails form in a something same. Half way by means of and second spent. Still have still to receive the response. It has gone back and it has cleaned my old hot final and am printing them well again. No wasteful my time again with Mech Solutions
4 / 5 Ernestina
Some cast to list Flashforge, any one sure that give form this would do for but to good sure does not return a Flashforge Finder (expósito that out of a hard way). Flashforge The finder requires a PTFE MK10.
4 / 5 Xenia
Awesome Substitutions, included have a measure engraved on him.
Looks to be of good quality and is compatible with different filaments the esees has tried like this far.
4 / 5 Shanell
Bro Does not buy Him there is the V2 or Mini or Select More these is two small thus blockade to heat, MK10 is a measure of precise edge, is reason have Bought these mk8 ETs for my printer and was toooo small giving 5 stars because it knows is not everything roughly me ! A lot of goodbye :)
5 / 5 Nikita
Any tried all still but until now, a nozzle has not been good and always cloged.. Of the one who Know because it looks no a same measure but has tried 0.2, 0.4 and 0.5 nozzle and has printed well and durable up to now.
4 / 5 Hailey
Partorisca A way of prize less headaches then cleaning nozzles.
4 / 5 Irvin
Satisfied L the very produced description in the rapport of the prize has continued
4 / 5 Bibi
the nozzles of qualities Adds! Always good to have transmissions, as I have bought the bands of pair of these.
4 / 5 Elenore
The nozzle is returned perfectly. Mark sure partorisca heat first to take an old a.
5 / 5 Hana
Has substituted my original nozzle with one of these - that differentiates it perfect impressions again.
5 / 5 Willy
Comes to little more then $1 tin a lot really take very better
5 / 5 Vera
Impossible to print with cest buse apres has test 5 impossible atasca all lucido bad time qualiter
4 / 5 Sandra
These are listed like this in a tiotle, but is in fact more afterwards to mm. Has has failed impressions like the result. Buyer beware. These are not partorisca value of the money.
4 / 5 Susy
Fast nave, good prize. Well partorisca abrasive composite PLA and HtPLA.

Any so that it adds partorisca ABS, looking nozzle temp helps.
5 / 5 Micaela
Ossia A second time ive has ordered this product and will order when required again
5 / 5 Kathi
has had to that substitute these nozzles constantly, really no well.... Some GO the looks there is lined to go in
5 / 5 Tonya
Like this always the element has arrived quickly, and some nozzles are qualities adds , work perfectly
4 / 5 Argelia
The element adds! A++ Vendor,good nave, everything is WELL, Thank you!
5 / 5 Myrtice
Screwed On to mine C10 and has printed immediately without hassle.
5 / 5 Shaunda
Access in well. Transmission a look of the soiled nozzle and does not leave any colour other impressions. Transmissions in of the seconds ! The nave is very fast !
4 / 5 Donita
These nozzles are of sound, well of work with mine A coverage.
Gives the graces for a good work :)
4 / 5 Beatriz
doing Adds in mine Creality Ender 3! Good quality, exaclty as it has expected.
5 / 5 Pandora
To the products likes him described, súper of fast delivery, highly recommend this element.

Top Customer Reviews: 18 Pcs MK8 Extruder ...

Rating: 4 out of 5 with 9 ratings
5 / 5 Margart
There is at all likes footprint with the nozzle. This nozzle has done utmost partorisca me on one displaced few weeks. Highly I recommend him, a resupplied of the different measures are adds. Fond when being able to change of 0.1 all a way to the nozzle any time. I have found the something sweet with a nozzle in mine cr10s with the height of discharge.
5 / 5 Lilian
Out of 6 0.4 nozzles a lot the suns an era a correct measure . 4 I Gave down extrusion and 2 looked how were pinched closed. Using an of one 0.8 is now looks included partorisca be a lot but ossia considerable quantity of bad parts of a measure there are them wanted. I wont be ordering these again.
4 / 5 Valorie
If I do not know like this to install these, Youtube is your partner . I have substituted a nozzle accionaría in mine CR-10 with one of these and has had some excellent pieces am exited.
5 / 5 Wilfred
To good sure has done well. A lot clearly it stamp stock exchanges measured and separated for each measure also. Good variety of measures also
5 / 5 Londa
has purchased this element because my CR-10 4mm the nozzle was clogging and squandering project with which projects. These nozzles return perfectly and is quickly to install. Like another reviewers has declared for the calm main products really profit of the main nozzle.
4 / 5 Merilyn
Any defect of apparent factory. Well packed and ordered in of the individual stock exchanges. Good prize.
4 / 5 Theodora
The mine was clogged have it like this substituted in mine Creality Ender 3. The works add.
4 / 5 Annabelle
Amazing box of multiple nozzles for different projects. Economic and good quality
4 / 5 Twanda
the prize Adds for nozzles resupplied. I have thought roughly ordering of another place, for ten pieces but he have declared that takes random measures among x row. This was produced clearer and fast . 😁 Good show.

Top Customer Reviews: 14 Pcs M6 3D ...

Rating: 4 out of 5 with 17 ratings
5 / 5 Ignacio
Nozzles Of fantastic substitution partorisca any V6 final hot, state that careers my Anycubic i3 Mega partorisca the day and the half directly without clogging, jams or misfeeding at all anything. Partorisca A price and calm takes 14 of in and sper fast nave! I will buy again it is necessary!
5 / 5 Antione
These nozzles of brass are of sound. The aims of next examination prjimo perfect machining. Using them in mine Prusa MK3S, and look each one has bitten as well as original. The value adds!
5 / 5 Theo
Works perfectly in mine Monoprice Mini Select. Substituting was hard but any one the fault of this part, has had once he in a law of nozzle perfectly.
5 / 5 Aisha
A bit yearn my Monoprice Selects Mini V2 but still useable, has has had to that so only regulate read partorisca build down bit it.
4 / 5 Jamison
The accesses add in mine YKSINX 3D Pen with LCD Screen of the exposure so only unscrews a key and scew the new in pen
5 / 5 Lorena
The fact adds in mine Anycubic Mega-S. I have done dozens of impressions like this far without subjects
5 / 5 Dacia
Has of the recalibrer The axe z during the substitution but think that is normal. He The marvel
5 / 5 Dennis
A product that is to be send has not been that is to be announce. Some nozzles are not compatible with my printers.
5 / 5 Lilli
The turn adds in mine YKSINX 3D Pen with LCD Screen of the exposure so only unscrews a key and scew the new in pen
5 / 5 Vertie
Has of the recalibrer the axe z during the substitution but think that is normal. He The marvel
4 / 5 Michiko
has Done adds in mine Anycubic Mega-S. I have done dozens of impressions like this far without subject
4 / 5 Omar
Installed in Monoprice mini. Extrudes Perfectly after a lot of impressions. Slightly the longest edge that original but still partorisca focus good.
5 / 5 Angelina
His Bus has received is not the although that of the sud his photos. At all dutout the same, any asser Of fillet and extreme also long.
5 / 5 Dyan
Rings Of the Drunk of the same type that to the sud the image... But this is not Lucido model that has received.
5 / 5 Lanora
The same commentary like other nozzles is MK8 and no very returned Prusa MK3S....😒
5 / 5 Deirdre
No like this very like this of the pictures sugest but still usable and doing well.
4 / 5 Harland
Happy with like this laws with a monoprice mp 200. Good prize so that takings.

Top Customer Reviews: LUTER 24PCS MK8 ...

Rating: 4 out of 5 with 2 ratings
4 / 5 Jerrold
The cost has verified to adore this very practical product with the small box touches his entreposer always joins buse near when I owe that the transmission joins atascado to the sud my ender 3
5 / 5 Carin
The cost has checked Looks etre of good qualitee

Top Customer Reviews: AFUNTA 24 Pieces M6 ...

Rating: 4 out of 5 with 30 ratings
1 / 5 Hugh
I tought has had the shot very on.. You are not ..
In all a six 0.4 mm nozzle a tool of more cleaned that is mm any returned.. In all 0.3 mm a no returned tool. Continuous in still 0.5 also.
So only 0.2 0.6 is a lot of (excepts one 0.2) but some holes are not centred ! ( It sees pictures).
Assumes that one 0.8 and 1mm is well but can not try reason I of the that has needles this measure.

24 nozzles And 5 cleaning needles partorisca 4 CAD but less tha the half is acceptable, think that will send it behind reason as it can have impressions of qualities when a nozzle is printing with that think is the 0.4 is in fact that ?
4 / 5 Yoshie
The needles are partorisca come broken a bubble wraps has not protected ship of crushing forces and has been shattered doing the needles bent and or has bent.
The nozzles are tiny and felt likes no except has done.. .. But his ALMOST impossibly to read some focus for some diameters of nozzle in a brass. These needs to stamp main or deeper.. Or colour coated!!
5 / 5 Shawna
A work of nozzle well. You will require the element of good heating partorisca big that one and can wants to believe temperature of extruder the pocolas terracings. If it use one and especially one will require you the good stepper engine and controller, also probably will want to use the extruder of walk directed with a nozzle. A smaller complaint so only has had with a together of nozzle is that all some nozzles are gone in a stock exchange . It have been well to have different sized nozzles in separate, labeled stock exchanges. Still ossia the neighbour add for a price.
5 / 5 Janise
I have it quell'has tried so only a 0.8 Nozzle in mine Ender 3 and some results after tweaking my profile to Cure the bit is very good. Has has had to that basically retards down a infill speed the bit, 70mm/s gaze partorisca do also changed to Zig Zag a model, that uses the height of discharge, some results are a lot resembled the height of discharge partorisca a nozzle.
4 / 5 Peter
The quality is well, cleaning the nozzles are really convenient. One first nozzle has tried has the data results very bad. Material there is some error in some diameters of some holes. In general, a container has the value adds partorisca a price although some nozzles are not usable.
2 / 5 Wendy
Too short to use with V6 J-Begin hot final. His of the that has quite edge to involve against a throat of nozzle/ of pause of heat. Useless for me, wish that is to be mention in description. Otherwise Would be well for any throat of the longest nozzle.
5 / 5 Mitzi
Bought these partorisca try out of different measures when extruding my projects. They are clearly labeled, this in spite of very small. One of concealed them is coming with a printer where any, as I do not have any one has thought that that am printing with.
4 / 5 Isaiah
It produces like this it is all good quality there is has used so only a like this far nozzle like this stock has taken plugged on sper easy to change and has used some needles of cleaners partorisca clear material stuck in the extruder would purchase again.
3 / 5 Winona
As described and quite satisfied with a product. It have been it it has better had his be separated to measure and a lot everything in a same container that leaves him opened to damagin g some edges to rub while in traffic.
5 / 5 Barbra
Awesome Bang Partorisca a buck. The impressions look good and am really fond having a capacity to try different nozzles
5 / 5 Evelina
I tought has had the shot very on.. You are not ..
In all a six 0.4 mm nozzle a tool of more cleaned that is mm any returned.. In all 0.3 mm a no returned tool . Continuous in still 0.5 also.
So only 0.2 0.6 is a lot of (excepts one 0.2) but some holes are not centred ! ( It sees pictures).
Assumes that one 0.8 and 1mm is well but can not try reason I of the that has needles this measure.

24 nozzles And 5 cleaning needles partorisca $14 CAD but less tha the half is acceptable, think that will send it behind reason as it can have impressions of qualities when a nozzle is printing with that think is the 0.4 is in fact that ?
5 / 5 Tena
A work of nozzle well. You will require the element of good heating for big that one and can wants to believe temperature of extruder the pocolas terracings. If utilisations one and especially one will require you the good stepper engine and controller, also probably will want to use to extruder of walk directed with a nozzle. A smaller complaint so only has had with a together of nozzle is that all some nozzles are gone in a stock exchange . It have been well to have different sized nozzles in separate, labeled stock exchanges. Still ossia the neighbour add for a prize.
4 / 5 Jacquline
Has has tried so only a 0.8 Nozzle in mine Ender 3 and some results after tweaking my profile to Cure the bit is very good. Has has had to that basically retards down a infill accelerate the bit, 70mm/s gaze to do also changed to Zig Zag a model, that uses the height of discharge, some results are a lot resembled the height of discharge for a nozzle.
5 / 5 Debrah
The quality is well, cleaning the nozzles are really convenient. One first nozzle has tried has the data results very bad. Material there is some error in some diameters of some holes. In general, a container has the value adds for a prize although some nozzles are not usable.
4 / 5 Barabara
Has bought these to try out of different measures when extruding my projects. They are clearly labeled, this in spite of very small. One some concealed is coming with a printer where any, as I do not have any one has thought that that am printing with.
5 / 5 Yee
Produced how is all good quality there is has used so only a like this far nozzle like this stock has taken plugged on súper easy to change and has used some needles of cleaners to clear material stuck in the extruder would purchase again.
4 / 5 Jolynn
Likes described and quite satisfied with a product. It have been it it has better had his be separated to measure and a lot everything in a same container that leaves him opened to damagin g some edges to rub while in traffic.
4 / 5 Carlo
Awesome Bang For a buck. The impressions look good and am really fond having a capacity to try different nozzles
5 / 5 Shameka
It have been the neighbour adds, excepts with a CR10-s PRO, Creality has changed a nozzle threading. Like this sadly it has it have to that the turn.
4 / 5 Natalia
Is gone in punctually and was the one who the expected and well of work in mine geeetech A10
5 / 5 Winifred
partorisca a bit those that tries it to them does really well in mine ender 3. It has not tried a unjaming the cane but calm would be necessary the mark partorisca find a good a fast plus.
5 / 5 Catherin
Looks the value adds partorisca of the money. It has used so only a nozzle like this far (and has not required to, a question was with my box of old printer a nozzle). But it is printing well and now I have transmissions aplenty.
4 / 5 Nguyet
Prizes and excellent selection and shipping the upper notch. Thank you
4 / 5 Lois
Has Bought these partorisca transmissions, has used two like this far, looks partorisca be well.
5 / 5 Santiago
These are useless. Almost any one is a correct measure (generally smaller that his supposition to be). Some of a small plus some very included have the hole in an end of a nozzle.
4 / 5 Kerrie
Fast nave, the good global quality and a prize can not be has beaten. Very satisfied with cost of mine and would not doubt to buy of Afunta in a future.
4 / 5 Micheal
5 nozzles Out of one stirs have any focuses at all partorisca aim that measured is.
5 / 5 Jennette
I produced is partorisca arrive his time. It acts Three well.
4 / 5 Elliott
The time of delivery was goddess and has produced was that it has expected them. Produçt Was good quality.
5 / 5 Rickey
Some hammer of more cleaned require a jammed filament partorisca be soft, as no attended partorisca use them like the file of welding.

Top Customer Reviews: ANYCUBIC I3 Mega 3D ...

Rating: 4 out of 5 with 7 ratings
1 / 5 Stanford
This piece has been supposed partorisca have a big temp parts like a thermistor that sustains time on 300 terracings C. Simply wrapping the low temp the thermistor rule in the tube that any one has included taken a time to seal final so that in fact it come from it, which would have melted a thermistor and a sleeve have jointed. Any use even the sleeve of quality, simply the tube of brass. So only the opinion, pays the careful attention to spend it when looking for a big temp material. Has thinks that that it go to go in in this way, is for this that any I same the first test. Look In a pics use, there is no directed shot of a thermistor out of a boss, the consider the fake. A real some have the thermistor that is 4mm in diameter, 5/8 thumb long or roughly 15-16mm long, and a final part, is sealed. When calm in the first place look you will think is the tube of hot (does not know his proper name and also pissed was to look arrive). This is going back and has to that arrived to order out of aliexpress, would have been here for now, and be a real thing.
5 / 5 Eleanore
Well fact and perfect for my needs. It is not returned my Monoprice Mini Select V2 but was able to do my reparation with half of him!
5 / 5 Corene
Always good to have these backups! They install quickly and the law ADDS partorisca my I3! That an amazing printer!
5 / 5 Gala
Working as it has expected! Shopping this again partorisca transmissions.
5 / 5 Carson
Lame that have expected partorisca a price. Works like this as well as one has substituted.
5 / 5 Betsy
Swapped Was with a clogged an and on and that careers any time
5 / 5 Dorthea
was the little there is disappointed that my final heat that is coming with a Mega-S blocked after the month of (certainly, daily) work. Felizmente Anycubic Has comprised the substitution in a container when I bought it, likes I swapped went him in just the few moments. It is quite he covers and game; it issues a tubing like a one takes, transmission on and was goes.

Are happy. I imagine, of then quickly an original has had to be substituted, will require the little of these, as it looks my experience is the quite common a. It was well to receive the little more transmissions of Anycubic down guaranteeed, but that has said that I am happy with my MEGA-S and a support has had like this far.

Top Customer Reviews: Official Creality ...

Rating: 4 out of 5 with 51 ratings
4 / 5 Shanell
Bought this extruder partorisca my CR-10 Mini because it was 'Official Creality'. Chico, the one who the deception. This anything same last the month.

A bowden the title of tube was defective out of a box. A cradle has lost his tension quickly and has caused down-extrusion, that directs to the enormous number of hours has squandered partorisca try to diagnose. Some edges in an aluminium partorisca a idler that resists randomly undressed when I have been partorisca take a ray, as I have had to that take a runs over washer for the take to remain in place.

Absolute rubbishes. Returning for the repayment and ordering a Hictop version
4 / 5 Carlene
Likes one of a reviewers has said already: it does not do like this feigned, and in fact, prevented to print.
Some separate accionarías was well, but has decided to upgrade the only reason the metal would be more resistant, durable and yadda yadda yadda...
Grieves I swapped some parts, my impressions would not stick to a bed anymore, has had the PLOT of stringing and blobbing spending. Has thinks that that a question was a level of bed, as I am spent enough the bit of time in that. Then moved to verify if a question was a nozzle , but any success.
After reading some descriptions in here, has decided to revert my transmissions and go back to some parts of extruder accionaría and looked, he all does again.
Are not even crazy, are there is disappointed so only :/
5 / 5 Ryan
Ossia the enormous upgrade in a OEM plastic extruder, an only complaint has is that has the tendency the loosen was after the moment because a washer creation in an arm of the crowbar is not a better of precise be I quite free to leave an arm the flex still quite tight to maintain a level of arm and in place.
4 / 5 Stacia
A plastic Extruder feed concealed is coming with a CR-10s the past has opted like this for a substitution of Aluminium. When you arrive It it was missing those several parts (the bowdon title of tube and a train to walk that feeds a filament also for the half some rays). Felizmente A shabby part was an arm that a filament feeds by means of and an arm of Aluminium was all that has required really substituted so much was able to scavenge some am disappeared separates that has required of a unit of original feeder. That arrived in a delivery would owe that there is matched some pointed parts in one add and he no. He still exited but to good sure disappointed.
4 / 5 Andra
One feeds mechanism a wine with my Ender 3 was all plastic. After only press 2 circles of filament aims the grove be it spent to one opening of a feeder. I have been concerned in a filament that bows with more than use. This was less than the 10 small installs and the parts are returned exactly. It was the prize that a colour was one same likes heater of filament. Ossia The value adds for a money! They are very happy with this upgrade.
4 / 5 Dana
Has solved my down-@@subject of extrusion in mine Ender 3; it results that the filament had been tunneling by means of an arm of plastic extruder accionaría and had done the canal that pinched a filament. Ossia The add and economic upgrade to do. Easy also!
5 / 5 Nancie
Adds the pinch to paint to a printer. Works like this as well as plastic a concealed is coming with a printer.
This upgrade is not really essential, is the bit of an impulse compraventa, but looks well. I guess an only advantage is that a filament will not break an orifice of then is metal .
4 / 5 Alverta
Would owe that come stock in Ender 3 pro is, but he to no. likes him all the world has had more an arm of tension in my crack of plastic extruder. There is not Had to that use anything except an arm he, just ray he on and was to go again. Amiably machined, big quality.
4 / 5 Cristy
The value adds for money, but has had to that file an entrance of filament in an arm of crowbar to soften an acute bevel. At the beginning, it likes him another, has levelled a bed that tries to take PLA to stick (usually easy to stick). This has not done.

Has found a subject was in fact a bevel in an arm of crowbar that takes in a filament that the causes tugs the printer concealed done down-extrude. Opened on a hole and bevel with dremel and file of small round. After this working perfectly.

REMARCE: It has used so only an arm of crowbar (stock plastic one has broken). This does not have to that pause like a plastic a. I also the stock cradle been supported by and other parts. It has used so only a crowbar.
4 / 5 Marquis
Looks to be that his very like this far. It has Had an occasion where maintains to slip in a retracts for a whole impression but has not had a @@subject of then. It looks to be doing very better then unit accionaría that is to go in ender 3 pro.
5 / 5 Lauretta
It Likes him one of a reviewers has said already: it does not do like this feigned, and in fact, prevented partorisca print.
Some separate accionarías was well, but has decided to upgrade the only because the metal would be more resistant, durable and yadda yadda yadda...
Grieves I swapped some parts, my impressions would not stick to a bed anymore, has had the PLOT of stringing and blobbing spending. Has thinks that that a question was a level of bed, as I am spent enough the bit of time in that. Then moved to verify if a question was a nozzle , but any success.
After reading some descriptions in here, has decided to revert my transmissions and go back to some parts of extruder accionaría and looked, he all does again.
Are not even crazy, are there is disappointed so only :/
4 / 5 Loretta
has Bought this extruder for my CR-10 Mini reason was 'Official Creality'. Chico, the one who the deception. This anything same last the month.

A bowden the title of tube was defective out of a box. A cradle has lost his tension quickly and has caused down-extrusion, that directs to the enormous number of hours has squandered to try to diagnose. Some edges in an aluminium for a idler that resists randomly undressed when I have been to take a ray, as I have had to take a runs over washer for the take to remain in place.

Absolute rubbishes. Returning for the repayment and ordering a Hictop version
4 / 5 Madelene
A plastic Extruder feeds concealed is coming with a CR-10s the past has opted like this for a substitution of Aluminium. When you arrive It it was missing those several parts (the bowdon title of tube and a train to walk that feeds a filament also for the half some rays). Felizmente A shabby part was an arm that a filament feeds by means of and an arm of Aluminium was all that has required really substituted so much was able to scavenge some am disappeared separates that has required of a unit of original feeder. That arrived in a delivery would owe that there is matched some pointed parts in one add and he no. He still exited but to good sure disappointed.
5 / 5 Rashad
Has had an original extruded crack, as another has mentioned Enders would have to that prpers have come with aluminium once of factory.
Access of substitution like originals and works well, like this far press well, but think it could be clamping the little too hard, has a time some circles of filament snap in an extruder.
Also would recommend to take of the money one in place of a red a, looks better and looks to have better components.
4 / 5 Bernice
Was to like you once. New to 3D press and looking for potential upgrades for my Ender 3 Pro. I have been lost. But I have found once this and installed the, the life was easier.

Ossia HAVE TO THAT it takes for new Ender 3 printers. Have Still to have a subject with him, and does not have any worry on some separates that it spends era. A cradle is very better that an extruder accionaría for a Ender 3. This upgrade is essential together with a capricorn the filament that tubes and new couplers.
5 / 5 Rick
Adds to pinch to paint to a printer. Works like this as well as plastic a concealed is coming with a printer.
This upgrade is not really essential, is the bit of an impulse compraventa, but looks well. I guess an only advantage is that a filament will not break an orifice of then is metal .
5 / 5 Tandy
Would owe that come stock in Ender 3 pro is, but he to no. likes him all the world has had more an arm of tension in crack of mine of plastic extruder. It has not Had to use anything except an arm he, just ray he on and was to go again. Amiably machined, big quality.
5 / 5 Reuben
The value adds partorisca money, but has had to that file an entrance of filament in an arm of crowbar to soften an acute bevel. At the beginning, it likes him another, has levelled a bed that tries to take PLA to stick (usually easy to stick). This has not done.

Has found a subject was in fact a bevel in an arm of crowbar that takes in a filament that the causes tugs the printer concealed done down-extrude. Opened on a hole and bevel with dremel and file of small round. After this working perfectly.

REMARCE: It has used so only an arm of crowbar (stock plastic one has broken). This does not have to that pause like a plastic a. I also the stock cradle been supported by and other parts. It has used so only a crowbar.
4 / 5 Gracie
Like this the walk of elegant extruder sucks has used a stock an and any p and oblem, but imagined it would have to that be better we ith this piece of good rigid aluminium. With which I in St lled had it swimming but the questions are spent for like this filament to regulate and king regulate a bed with a bed that tries of levels, but his all has failed. Like this after a lot of test and the failure has dipped for behind an original, and guess that. Work like the charm. It was not that it is bad with my piece
4 / 5 Suzie
Easy assembly, looks really good and súper durable. Helped me with my subjects with down extrusion like my stock a there is had to break in an arm. Ossia The good compraventa SO ONLY YES CALM the precise
5 / 5 Tory
Googled the video in that substitutes this in mine CR-10. A container was quite coffins, with just some parts, but has not ordered he for one drives - the excellent work extracted down-the extrusion issue that has had.
4 / 5 Jacquelin
Has to that be a better upgrade has taken for my Anet A8. The impressions of flexible filament to surprise with east! Easy to gather but has had to that be creative in an installation as it is not done for him.
5 / 5 Maxine
An extruder goes fed that is coming with a 'Upgrade' was entirely smooth. It sees sinister wheel in picture. It slips to feed a PLA. I go to go back to a one this is coming with a ender 3 pro.
4 / 5 Adaline
Has required something resembled this extruder for my project of house. It is not partorisca to 3D printer as it can not comment in his has designated characteristic but with which few modifications have done perfectly in my project.
4 / 5 Su
The element is good work and fixed my down-@@subject of extrusion for my CR-10s. This in spite of comes talent ANY INSTRUCTION, onyl the QR the code that link to the video. The video is of POOR quality and requires a lot of guesswork for assembly.
4 / 5 Alla
Has decided to take this like a upgrade to mine ender 3. While it disassembles an original extruder, has found that a cradle the arm has uploaded there is had to break quite severe in him, because of a force to jump heavy and the when being plastic. I have printed several impressions with this extruder of metal and is doing well.
5 / 5 Belen
Produced According to the Description and of quality a lot well, fast and serious vendor.
Partorisca Recommend &43;&43;&43;&43;&43;
4 / 5 Sung
has finalised partorisca return a Ender 3 to the equal that have finalised that it has to that return these also. The quality adds partorisca these insiemi this in spite of.
5 / 5 Magdalen
Has sent a wrong cradle that has caused the series of underextrusion each one another discharge. I took the week the troubleshoot this after the install. Also a washer has sent was a wrong measure to the equal that for a lack of instruction of a box ( the appeals of Youtube to still he). This he harder that install have had like this 2 wrong parts partorisca he.
4 / 5 Gisela
Likes has mentioned everything In Aluminium like this more resistant that the piece in plastic and require besides original of Creality. Simple substitute he
4 / 5 Flavia
Looks the part of good quality, but unfortunately an edge undressed was while gathering it before a lock washer has compress included.

Will be partorisca return the and trying another to hopefully take some better results with a holding of edge.
5 / 5 Etta
Good substitution, does not feel partorisca like the go to break when that tries to change a filament like a plastic one a printer has come with.
4 / 5 Lucy
This was a prime minister upgrade has added to the mine CR-10. I have installed this previously to any press and is the better way that a walk of original of the plastic extruder feeds. Highly recommended partorisca any buying it Creality printer.
5 / 5 Lissette
Loves this thing but a cradle can not dip quite a lot of tension in a train to extrude properly. It has had to add some washers for the presionar.
4 / 5 Kathlene
Video of the instruction does not have any audio and takes the bit to touch around boxes finds some right rays but produced ADDS and to good sure a upgrade of original of plastic feeder that is coming with printer
4 / 5 Conception
Ossia the really good product , sure mark that presiona down a crowbar of the cradle and you would have to that take utmost extrusion. An aluminium is rock and quality abonos solids. The assembly is easy and quickly, in general to good sure recommend.
5 / 5 Willie
It is far better then an extruder comes with. An original is done of plastic and the wears was very quickly.
4 / 5 Geneva
Is equally quite fast and fact really well. There is not any instruction on installing it, but there is video on Youtube. Ossia Very better that this economic plastic walk feeds unit!
4 / 5 Loriann
Ossia Exactly that has loved, good creation, solid parts. It can use has moulds instructions for washer placing, but otherwise is awesome.
4 / 5 Latrisha
That can say exactly like this announced and there is rid punctually.
5 / 5 Randa
Returns perfectly in mine Ender 3 and leave me to print flexible TPU
5 / 5 Valencia
the Amazing accesses perfect comes with QR code to video of Youtube/of Youtube for installation really easy to dip joint.
4 / 5 Ted
Good prize. The must there is upgrade. A plastic factory some wears out of fast.
5 / 5 Felicitas
He any And The step to plan gather. Attention, takes example to the sud the original setting. (The smallest error can give your No functional printer).
5 / 5 Arleen
Easy to install, will last the long time has compared to a unit accionaría
5 / 5 Frankie
It adds on the only note of the that partorisca take the recalibrate yours and any
5 / 5 Nidia
the upgrade is excellent. Pair Against, am missing crowbar of bras to the reception.
4 / 5 Shayne
Quality of utmost Build but does not have any Assembly Istructions has comprised.
5 / 5 Danille
Ossia For far way the quality has better compared to a stock one in a ender 3, quite happy with him !
5 / 5 Elizebeth
Upgraded My flsun prusa i3 using this and the law adds
5 / 5 Arden
Works to the equal that has expected. It have to that last longer that an extruder accionaría
Rank Image Product Name Score Check Price
1 first LUTER 24PCS MK8 Extruder Nozzles 3D Printer Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Free Storage Box for Makerbot Creality CR-10 Ender 3 5 LUTER 24PCS MK8 Extruder Nozzles 3D Printer Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Free Storage Box for Makerbot Creality CR-10 Ender 3 5 LUTER
9.8
Score
View Product
2 LUTER 20PCS 0.4mm 3D Printer Nozzles MK8 Extruder Nozzles + 5 PCS Stainless Steel Nozzle Cleaning Needles for Makerbot Creality CR-10 LUTER 20PCS 0.4mm 3D Printer Nozzles MK8 Extruder Nozzles + 5 PCS Stainless Steel Nozzle Cleaning Needles for Makerbot Creality CR-10 LUTER
9.5
Score
View Product
3 best ANYCUBIC I3 Mega 3D Printer Extruder Print Head ANYCUBIC I3 Mega 3D Printer Extruder Print Head ANYCUBIC
9.3
Score
View Product
4 AFUNTA 24 Pieces M6 3D Printer Extruder Brass Nozzle Print Heads for 1.75mm MK8 Makerbot, ANET A8 and CR-10 Printer, 7 Sizes (0.2/0.3/0.4,/0.5/0.6/0.8/1.0mm) + 5 Sizes Nozzle Cleaning Needles AFUNTA 24 Pieces M6 3D Printer Extruder Brass Nozzle Print Heads for 1.75mm MK8 Makerbot, ANET A8 and CR-10 Printer, 7 Sizes (0.2/0.3/0.4,/0.5/0.6/0.8/1.0mm) + 5 Sizes Nozzle Cleaning Needles AFUNTA
8.9
Score
View Product
5 Ender 3/Ender 3 Pro 24V 3D Printer Extruder Assembled MK8 Hot End,1.75mm, 0.4mm Nozzle Ender 3/Ender 3 Pro 24V 3D Printer Extruder Assembled MK8 Hot End,1.75mm, 0.4mm Nozzle Ruikarhop
8.7
Score
View Product
6 Micro Swiss MK10 All Metal Hotend Kit .4mm Nozzle for WANHAO, FlashForge Micro Swiss MK10 All Metal Hotend Kit .4mm Nozzle for WANHAO, FlashForge Micro-Swiss
8.4
Score
View Product
7 Mech Solutions Ltd 10pcs 0.4 mm MK8 Stainless Steel Extruder 3D Printer Nozzle for 1.75 mm Filament 3D Printer (Makerbot, Creality, RepRap,etc) Mech Solutions Ltd 10pcs 0.4 mm MK8 Stainless Steel Extruder 3D Printer Nozzle for 1.75 mm Filament 3D Printer (Makerbot, Creality, RepRap,etc) Mech Solutions Ltd
8.2
Score
View Product
8 Official Creality 3D All Aluminum Construction Upgraded MK-8 Style Extruder Drive Feed for Ender 3 CR-10 and CR-10S-GRAY ... Official Creality 3D All Aluminum Construction Upgraded MK-8 Style Extruder Drive Feed for Ender 3 CR-10 and CR-10S-GRAY ... Creality 3D
7.8
Score
View Product
9 18 Pcs MK8 Extruder Nozzle M6 3D Printer Extruder Brass Nozzle Print Head with 7 Different Sizes (0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm) for 1.75MM MK8 Makerbot, Anet A8 and CR-10 Printer 18 Pcs MK8 Extruder Nozzle M6 3D Printer Extruder Brass Nozzle Print Head with 7 Different Sizes (0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm) for 1.75MM MK8 Makerbot, Anet A8 and CR-10 Printer Kulannder
7.6
Score
View Product
10 14 Pcs M6 3D Printer Nozzle 0.4mm Extruder Brass Nozzle Print Head for 1.75mm Filament E3D V5 V6 Makerbot 14 Pcs M6 3D Printer Nozzle 0.4mm Extruder Brass Nozzle Print Head for 1.75mm Filament E3D V5 V6 Makerbot Kulannder
7.4
Score
View Product

Trending 3D Printer Extruders Products

What is 3D Printer Extruders?

Top Customer Reviews: Ender 3/Ender 3 Pro ...

Rating: 4 out of 5 with 3 ratings
4 / 5 Chiquita
Extracted like this as well as OEM boss. So only the bosses on, presiona down both peices. Hot final and a part of filament. The mine was free, has learnt a hard way.
5 / 5 Suellen
This substitution in fact looks partorisca be better quality that an extruder accionaría that is coming with my car. It uses rays of better quality partorisca resist some bosses in place, and has looked included an additional ray partorisca resist an element partorisca heat in place.

Will say that a nozzle that has come he with, has had the main measure hex that a level 6 mm nozzle that the majority of people has the habit of. This in spite of, have take a big plus and regulate it 6 mm hex apt right nozzle his without any subjects.
5 / 5 Grayce
Wow! This hotend has treated extremely well. It can see a difference immediately printing crazy filament with a new one has compared to mine 2 old year a.

Has attacked was some stars been due to any come with an average of silicone was aimed partorisca have in a picture, but ossia well, is so only the pair of bucks.




Have a 10 best 3d printer extruders question

Customer questions & answers 10 best 3d printer extruders

Get to Know 10 best 3d printer extruders

Manage 10 best 3d printer extruders Content and Devices

10 best 3d printer extruders Customer Service

Customer reviews for 10 best 3d printer extruders